Wireless Microphones

Excellent performance in a small package for ENG and DSLR video production are the purpose and intent of the LR receiver design. Tracking front-end filters block interference from high powered RF signals on nearby channels to preserve the extended...

The ARG25 is a 25ft antenna cable of Belden 9913F low-loss coax cable with BNC connectors at each end. Double shielded, flexible, 50-ohms, with a foamed polyethylene dielectric. Lower loss (1 to 1.2dB) with somewhat less weight than standard RG-8 with...

The UMC16B multi-coupler combines ceramic filtering with low noise, high intercept point RF distribution to provide outstanding performance and flexibility. Up to eight diversity receivers or up to 16 non-diversity receivers can be utilized in up to a...

Accessory mounting kit for the ALP antennas and the SNA antenna. All the parts are very rugged stainless steel and will match various mic stands and lighting stands. The threaded stud is used to join various combinations of the parts in the kit. Features...

The DWA01D is a wireless receiver adapter for use with DWR-S01D digital wireless receiver or WRR-855S wireless receiver. Provides V-mount connection for Sony'slot-in type wireless receivers. It'supports external word SYNCinput (for use with digital audio...

The body of the antenna is made of from fiberglass circuit board material. Nomenclature is printed in copper on the board with a black solder mask to provide excellent visual contrast. Copper traces on the circuit board form a balun for an ideal match to...

Introducing the DWZ Series with affordable 2.4GHz technology. You get solid-gold 24-bit linear PCM digital audio to keep you sounding your best. You get robust transmission and easy channel selection. Even automatic feedback reduction, encryption and...

Modular UHF tuner base designed to house up to six WRU-806 or URX-M2 UHF tuner modules in one rack. Built-in active antenna divider allows one pair of active antennas (optional) or passive antennas (supplied) to operate all six channels. Output level...

The M2T transmitter occupies a half rack space, and comes with hardware to mount two (2) M2T Receivers into a rack. Features Suitable for M2 duet series M2T transmitters

The HHXTND is an extender for mic flag which allows for access to LCD screen and talkback button. Features Allows for access to LCD screen and talkback button

Color coded antennas for UM belt packs, newer SM series belt-pack units and also newer SR receivers. Standard male SMA connector. Specify the block such as AMJ-24. Features Construction is of nearly indestructible steel wire rope with a stainless steel...

A completely new digital architecture was developed for the DSW wireless system. Extended operating range rivals the best analog and digital hybrid wirelessreg; systems, with remarkable audio quality and only 2.5ms of latency. The system operates on...

Excellent performance in a small package for ENG and DSLR video production is the purpose and intent of the LR receiver design. Tracking front-end filters block interference from high powered RF signals on nearby channels to preserve the extended...

This coaxial design is approximately 36 inches in overall length, with an SMA connector. The other end is cut to a 1/4 wavelength of the corresponding frequency block with a color band and tag specifying its block. Features Especially useful for...

The DWA-F01D is an expandable adaptor for digital wireless receivers, designed to fit in mixer bags for ENG/EFP applicationsequiring top panel operation and the option of stand-alone battery power. The unit is also able to offer DWX digital audio for...

The M2T transmitter occupies a half rack space. This kit provides the hardware needed to mount one M2T into a single rack space. Features Compatible with M2T transmitter

Color coded antennas for UM belt packs, newer SM series belt-pack units and also newer SR receivers. Standard male SMA connector. Specify the block such as AMJ-24. Features Construction is of nearly indestructible steel wire rope with a stainless steel...

The transmitters offer hands free setup and adjustment using audible tones. They can be put to sleep to conserve battery power during setup while buried inside costuming, then awakened for normal operation when the production begins. Other features...

The A170AC is a VHF straight whip antenna with right angle BNC connector and whip length of 14-inch. Features Right angle BNC connector 14" Whip length

The UCR411A receiver provides professional performance and a versatile feature set in a compact design for field and location production. All settings are made from the front panel with a powerful LCD interface, making the unit ideal for use in portable...

A completely new digital architecture was developed for the DSW wireless system. Extended operating range rivals the best analog and digital hybrid wirelessreg; systems, with remarkable audio quality and only 2.5ms of latency. The system operates on...

UHF antenna, straight BNC. Specify block such as A8U-24 for block 24. These antennas can be used one block above and below the specified block. Features Color coded tip per ANSI resistor code

Sony COLD SHOE MOUNT ADPT FOR URX-P40 RX

The DBu transmitter is a 4th generation design with specially developed, high-efficiency digital circuitry for extended operating time on two AA batteries. The transmitter can tune in coarse or fine steps across the UHF television band from 470 to 608MHz...

This high performance 2-channel portable slot-in receiver is an ideal choice for ENG/EFP and location sound applications. The DWR-S03D is part of Sony's third generation DWX series digital wireless microphone system that combines advanced digital...

The Passive cable for high output active pickups and line outputs from keyboards and other audio equipment for all Lectrosonics transmitters with 5-pin input jacks. Start with the input gain control knob on the transmitter between 10 and 11rsquo;o clock...

This unique plug-on transmitter design will ideally match any microphone or line level source via a standard XLR connector. Phantom power is selectable at 5, 15 and 48 volts, or can be turned off for use with dynamic microphones and line level signal...

This coaxial design is approximately 36 inches in overall length, with an SMA connector. The other end is cut to a 1/4 wavelength of the corresponding frequency block with a color band and tag specifying its block. Features Especially useful for...

The Venue 2 Receiver is a modular solution that effectively deals with a congested RF spectrum with a variety of options that allows a system configuration to be idealized for a particular installation or application. The receiver is comprised of several...

Excellent performance in a small package for ENG and DSLR video production are the purpose and intent of the LR receiver design. Tracking front-end filters block interference from high powered RF signals on nearby channels to preserve the extended...

Whip antenna for UM belt packs, newer SM series belt-pack units and also newer SR receivers. Standard male SMA connector. Features Comes with antenna, assorted color caps and cutting template

The UMC16B multi-coupler combines ceramic filtering with low noise, high intercept point RF distribution to provide outstanding performance and flexibility. Up to eight diversity receivers or up to 16 non-diversity receivers can be utilized in up to a...

The RMPR400B-2 is a dual rack mount kit for a single R400a-Ver2 Receiver (receiver not included in RMPR400B-2 Kit). The brackets and couplers are symmetrical so the receiver can be mounted on either the left or right side of the rack. Features Dual...

Excellent performance in a small package for ENG and DSLR video production is the purpose and intent of the LR receiver design. Tracking front-end filters block interference from high powered RF signals on nearby channels to preserve the extended...

The UCR411A receiver provides professional performance and a versatile feature set in a compact design for field and location production. All settings are made from the front panel with a powerful LCD interface, making the unit ideal for use in portable...

The BCHINGED is a Rugged aluminum hinged belt clip kit for UM, LM and LMb transmitter. Comes with mounting screws. Features Suitable for UM, LM and LMb transmitter Comes with mounting screws

The WD-850/9F1 antenna divider provides enhanced RF reception for up to four 800 series UHF wireless microphone receivers. The WD-850/9F1 splits the signal from a pair of AN-820A or AN-820A/9L antennas and distributes to up to four receivers. The divider...

To meet the demand for both extended operating range and extended battery life, the V series SM transmitters offer selectable output power ranging from 50 and 100 mW on the single battery model, to 50, 100 and 250 mW on the dual battery model. With...

The DCR12/A5U is a universal AC power supply intended for Lectrosonics IFBT4, IFBT4-VHF and IFBT4/E01 transmitters. Features Universal AC power supply Compatible with: IFBT4 Transmitter IFBT4-VHF Transmitter IFBT4/E01 Transmitter

The M2C active antenna combiner is designed as an ideal matching component to Lectrosonics digital transmitters. Up to eight transmitters can feed a single antenna to minimize cabling in multi-channel systems. The inputs are isolated to minimize...