Lectrosonics

UHF antenna, straight BNC. Specify block such as A8U-24 for block 24. These antennas can be used one block above and below the specified block. Features Color coded tip per ANSI resistor code

The DBu transmitter is a 4th generation design with specially developed, high-efficiency digital circuitry for extended operating time on two AA batteries. The transmitter can tune in coarse or fine...

The Passive cable for high output active pickups and line outputs from keyboards and other audio equipment for all Lectrosonics transmitters with 5-pin input jacks. Start with the input gain control...

This unique plug-on transmitter design will ideally match any microphone or line level source via a standard XLR connector. Phantom power is selectable at 5, 15 and 48 volts, or can be turned off for...

This coaxial design is approximately 36 inches in overall length, with an SMA connector. The other end is cut to a 1/4 wavelength of the corresponding frequency block with a color band and tag...

The Venue 2 Receiver is a modular solution that effectively deals with a congested RF spectrum with a variety of options that allows a system configuration to be idealized for a particular...

Excellent performance in a small package for ENG and DSLR video production are the purpose and intent of the LR receiver design. Tracking front-end filters block interference from high powered RF...

Whip antenna for UM belt packs, newer SM series belt-pack units and also newer SR receivers. Standard male SMA connector. Features Comes with antenna, assorted color caps and cutting template

The UMC16B multi-coupler combines ceramic filtering with low noise, high intercept point RF distribution to provide outstanding performance and flexibility. Up to eight diversity receivers or up to...

The RMPR400B-2 is a dual rack mount kit for a single R400a-Ver2 Receiver (receiver not included in RMPR400B-2 Kit). The brackets and couplers are symmetrical so the receiver can be mounted on either...

Excellent performance in a small package for ENG and DSLR video production is the purpose and intent of the LR receiver design. Tracking front-end filters block interference from high powered RF...

The Lectrosonics IFBT4 UHF transmitter was designed for use in broadcast, motion picture, theater, and stage applications where extended operating range and high quality audio are essential. The...

The UCR411A receiver provides professional performance and a versatile feature set in a compact design for field and location production. All settings are made from the front panel with a powerful...

The BCHINGED is a Rugged aluminum hinged belt clip kit for UM, LM and LMb transmitter. Comes with mounting screws. Features Suitable for UM, LM and LMb transmitter Comes with mounting screws

To meet the demand for both extended operating range and extended battery life, the V series SM transmitters offer selectable output power ranging from 50 and 100 mW on the single battery model, to...

The PDR (Portable Digital Recorder) is designed for HD quality professional use. For situations in which the distance is extreme or where using a wireless microphone is not practical, the PDR...

The SPNTWB combines the boards from the SPN812 and the SPNCWB in a 2RU chassis to provide a complete, stand-alone component for telepresence and audio conference systems. The unit can be used with...

The DCR12/A5U is a universal AC power supply intended for Lectrosonics IFBT4, IFBT4-VHF and IFBT4/E01 transmitters. Features Universal AC power supply Compatible with: IFBT4 Transmitter IFBT4-VHF...

The M2C active antenna combiner is designed as an ideal matching component to Lectrosonics digital transmitters. Up to eight transmitters can feed a single antenna to minimize cabling in...

To meet the demand for both extended operating range and extended battery life, the V series SM transmitters offer selectable output power ranging from 50 and 100 mW on the single battery model, to...

The Lectrosonics IFBT4 UHF transmitter was designed for use in broadcast, motion picture, theater, and stage applications where extended operating range and high quality audio are essential. The...

The DSP-based design works with all Digital Hybrid receivers, and is backward compatible for use with Lectrosonics 200 and 100 Series and IFB receivers and some other brands of analog wireless...

To meet the demand for both extended operating range and extended battery life, the V series SM transmitters offer selectable output power ranging from 50 and 100 mW on the single battery model, to...

The Lectrosonics IFBT4 UHF transmitter was designed for use in broadcast, motion picture, theater, and stage applications where extended operating range and high quality audio are essential. The...

Noise-free audio muting with any Lectrosonics wireless transmitter with a 5-pin input jack. Features In Line "no pop" audio muting Compatible with all Lectrosonics 5 pin transmitters Rugged machined...

To meet the demand for both extended operating range and extended battery life, the V series SM transmitters offer selectable output power ranging from 50 and 100 mW on the single battery model, to...

The ARG100 is a 100ft antenna cable of Belden 9913F low-loss coax cable with BNC connectors at each end. Double shielded, flexible, 50-ohms, with a foamed polyethylene dielectric. Lower loss (3 to...

Color coded antennas for UM belt packs, newer SM series belt-pack units and also newer SR receivers. Standard male SMA connector. Specify the block such as AMJ-24. Features Construction is of nearly...

The UCR411A receiver provides professional performance and a versatile feature set in a compact design for field and location production. All settings are made from the front panel with a powerful...

To meet the demand for both extended operating range and extended battery life, the V series SM transmitters offer selectable output power ranging from 50 and 100 mW on the single battery model, to...

The REFUMCABLE is a Connecting cable for mute switch. It is used between the switch and the transmitter. Features Used between the switch and the transmitter

Color coded antennas for UM belt packs, newer SM series belt-pack units and also newer SR receivers. Standard male SMA connector. Specify the block such as AMJ-24. Features Construction is of nearly...

The unique design of the HMa Plug-On Transmitter provides several distinct features for professional applications: Outstanding RF operating range Superb audio quality Corrosion-resistant housing ...

Octopack combines up to four SRa Series compact receivers into a lightweight, rugged assembly with self-contained power supply and antenna signal distribution. This powerful production tool provides...

The SMDA-MDOR is a replacement battery door for SM series dual battery transmitters. Features Compatible with SM series dual battery transmitters

The HHVMC is a variable microphone capsule for the HH series transmitters which includes adjustments for bass, midrange and treble. Features Compatible with for HH series transmitters

The RMPR400B-1 is a single rack mount kit for a single R400a-Ver2 Receiver (receiver not included in RMPR400B-1 Kit). The brackets and couplers are symmetrical so the receiver can be mounted on...

The CCMINI is an A soft sided, padded and zippered carrying case for compact wireless systems such as the UCR400, UCR401, and other UCR units. Features Suitable for compact wireless systems such as...

To meet the demand for both extended operating range and extended battery life, the V series SM transmitters offer selectable output power ranging from 50 and 100 mW on the single battery model, to...

The AMM-O is a Color coded transmitter antenna caps. Features Suitable for use with transmitter antenna