Lectrosonics

UHF antenna, straight BNC. Specify block such as A8U-24 for block 24. These antennas can be used one block above and below the specified block. Features Color coded tip per ANSI resistor code

To meet the demand for both extended operating range and extended battery life, the V series SM transmitters offer selectable output power ranging from 50 and 100 mW on the single battery model, to...

The M119 microphone exhibits a broad, flat frequency response well suited to tape recording or speech reinforcement applications. The omnidirectional pickup pattern makes the exact placement of the...

The SSM is ideal in theatrical or any other production where concealment in costuming is required. In spite of its tiny size, the transmitter offers an extensive feature set and performance on par...

The Passive cable for high output active pickups and line outputs from keyboards and other audio equipment for all Lectrosonics transmitters with 5-pin input jacks. Start with the input gain control...

Excellent performance in a small package for ENG and DSLR video production is the purpose and intent of the LR receiver design. Tracking front-end filters block interference from high powered RF...

The DHu Digital Hybrid Wireless handheld transmitter represents a versatile solution for a variety of wireless microphone applications including live performance, broadcast, AV rental and houses of...

A completely new digital architecture was developed for the DSW wireless system. Extended operating range rivals the best analog and digital hybrid wirelessreg; systems, with remarkable audio quality...

The UCR411A receiver provides professional performance and a versatile feature set in a compact design for field and location production. All settings are made from the front panel with a powerful...

The ARG2 is a 2ft antenna cable of standard RG-58 coax cable with BNC connectors at each end. Loss of 1dB or less with 0.25" diameter. Features Antenna cable of standard RG-58 coax cable BNC...

The DSQD Half Rack Receiver with analog and digital Dantereg; network audio outputs utilizes the Lectrosonics signature digital architecture with remarkable audio quality and ultra-low latency. The...

This coaxial design is approximately 36 inches in overall length, with an SMA connector. The other end is cut to a 1/4 wavelength of the corresponding frequency block with a color band and tag...

The Lectrosonics IFBT4 UHF transmitter was designed for use in broadcast, motion picture, theater, and stage applications where extended operating range and high quality audio are essential. The...

The Venue 2 Receiver is a modular solution that effectively deals with a congested RF spectrum with a variety of options that allows a system configuration to be idealized for a particular...

The DSP-based design works with all Digital Hybrid receivers, and is backward compatible for use with Lectrosonics 200 and 100 Series and IFB receivers and some other brands of analog wireless...

A completely new digital architecture was developed for the DSW wireless system. Extended operating range rivals the best analog and digital hybrid wirelessreg; systems, with remarkable audio quality...

UHF antenna, straight BNC. Specify block such as A8U-24 for block 24. These antennas can be used one block above and below the specified block. Features Color coded tip per ANSI resistor code

The SRc series design includes two separate receivers built into a single, ultra-compact housing with adapters for video camera receiver slots and for standalone use. Digital Hybrid Wirelessreg;...

The LT transmitter offers a full set of professional features in a compact, rugged package. The unit is compatible with all Digital Hybrid Wireless receivers and even some from other manufacturers,...

To meet the demand for both extended operating range and extended battery life, the V series SM transmitters offer selectable output power ranging from 50 and 100 mW on the single battery model, to...

UHF antenna, straight BNC. Specify block such as A8U-24 for block 24. These antennas can be used one block above and below the specified block. Features Color coded tip per ANSI resistor code

Color coded antennas for UM belt packs, newer SM series belt-pack units and also newer SR receivers. Standard male SMA connector. Specify the block such as AMJ-24. Features Construction is of nearly...

This adapter cable provides a convenient interconnection between an audio source with XLR-M output connectors and the input of a Lectrosonics device with Phoenix connectors. 12" between connectors,...

The C119RA is a Right-angle mic clip for M119 and M140 lavaliere mics. Features Suitable for M119 and M140 lavaliere mics

To meet the demand for both extended operating range and extended battery life, the V series SM transmitters offer selectable output power ranging from 50 and 100 mW on the single battery model, to...

The PS200A is a 12" power cable, Hirose4 to DC locking, coax power connector. For powering newer Lectrosonics receivers from cameras with Hirose power connector. Features Suitable for powering newer...

Extensive remote control functions for DM Series processors can be implemented easily and inexpensively with the RCWPB8 switch panel. LEDs built into each switch indicate various functions and states...

PCA900 antenna provides wide bandwidth and a circular pattern in a compact, rugged package. A BNC connector allows direct connection to receivers and multicouplers with standard 50 ohm coaxial cable...

This design includes two separate receivers built into a single, ultra compact housing with adapters for use in video camera receiver slots and multicouplers, and several adapters provide stand-alone...

To meet the demand for both extended operating range and extended battery life, the V series SM transmitters offer selectable output power ranging from 50 and 100 mW on the single battery model, to...

Portable, high performance, triple-conversion, frequency synthesized, UHF receiver fully compatible with all Lectrosonics 400 Digital Hybrid Wireless and Series 200 and 100 Analog transmitters (plus...

Color coded antennas for UM belt packs, newer SM series belt-pack units and also newer SR receivers. Standard male SMA connector. Specify the block such as AMJ-24. Features Construction is of nearly...

Portable, high performance, triple-conversion, frequency synthesized, UHF receiver fully compatible with all Lectrosonics 400 Digital Hybrid Wireless and Series 200 and 100 Analog transmitters (plus...

UHF antenna, straight BNC. Specify block such as A8U-24 for block 24. These antennas can be used one block above and below the specified block. Features Color coded tip per ANSI resistor code

UHF antenna, straight BNC. Specify block such as A8U-24 for block 24. These antennas can be used one block above and below the specified block. Features Color coded tip per ANSI resistor code

The LMb transmitter can be configured to operate as a one touch device with a single power on/off switch on the top panel, or with full access to all operational parameters using the side panel...

Color coded antennas for UM belt packs, newer SM series belt-pack units and also newer SR receivers. Standard male SMA connector. Specify the block such as AMJ-24. Features Construction is of nearly...

Octopack combines up to four SRa Series compact receivers into a lightweight, rugged assembly with self-contained power supply and antenna signal distribution. This powerful production tool provides...

The DSP-based design works with all Digital Hybrid receivers, and is backward compatible for use with Lectrosonics 200 and 100 Series and IFB receivers and some other brands of analog wireless...

UHF antenna, straight BNC. Specify block such as A8U-24 for block 24. These antennas can be used one block above and below the specified block. Features Color coded tip per ANSI resistor code