Transceivers & Media Converters

SFP+ transceivers available for 10GBASE-SR (short range) multimode and 10GBASE-LR (long-range) single-mode fiber. Automatic rate detection Functions as a fiber mode converter and a fiber repeater. Ideal for linking a switch via a 10-GbE Ethernet link to...

ADAM-6000 accomplishes the integration of automation and enterprise systems easily through internet technology, so that users can avoid changing the entire architecture of the control system and even remotely monitor the device status more flexibly...

ADAM-6000 accomplishes the integration of automation and enterprise systems easily through internet technology, so that users can avoid changing the entire architecture of the control system and even remotely monitor the device status more flexibly...

The ADAM-6017 is designed with 8 analog inputs and 2 digital outputs to satisfy all plant needs. Each analog channel is allowed to configure an individual range for variety of applications.10/100 Mbps communication rateI/O type: 8 AI / 2 DOInput type:...

Meet the multiple network connectivity needs of today's network environment with this 2 transceiver/media converterSupports cost-efficient twisted pair cables for high-speed data transfer up to 100 metersWith 10/100Base-TX technology get up to 100Mbps...

Meet the multiple network connectivity needs of today's network environment with this 2 transceiver/media converterSupports twisted pair cables for durability and improved signal transfer while ensuring smooth and seamless data transferWith 100Base-TX...

The Micro Mini Media Converter is ideal for bringing fiber to the desktop and for mobile applications where light weight, compact size, and low power requirements are critical. Weighing only 2.5 ounces and about the length of a house key, this...

Connect Gigabit-speed fiber optic to a 10-/100-/1000-Mbps copper UTP segment while also powering 802.3af devices at the end of the CAT5 run. This PoE PSE Gigabit Media Converter from Black Box enables you to transparently connect copper cabling to...

Bridge Fast Ethernet fiber optic and copper segments and provide reliable power to devices in out-of-the-way areas. The BLACK BOX PoE PSE Media Converter not only connects 100BASE-FX fiber to 10BASE-T/100BASE-TX copper, but it also functions as power...

The PoE PSE Media Converter not only enables you to connect copper cables to long-distance fiber data links, it also safely powers compatible devices plugged in on the copper side.Fully compliant with the 802.3af Power over Ethernet (PoE) standard, the...

Constrained by the distance limits of PoE over copper? Incorporate fiber into your network! This PoE PSE Media Converter not only enables you to connect copper cables to long-distance fiber data links, it also safely powers compatible devices plugged in...

Bridge long-distance Fast Ethernet fiber optic segments with Ethernet or Fast Ethernet copper cabling-all without the need for a local power supply-by using a BLACK BOX® PoE PD Media Converter. Compatible with the 802.3af PoE standard, the converter...

Bridge long-distance Fast Ethernet fiber optic segments with Ethernet or Fast Ethernet copper cabling-all without the need for a local power supply-by using a BLACK BOX® PoE PD Media Converter. Compatible with the 802.3af PoE standard, the converter...

AddOn 1000Base-SX(ST) to 1000Base-LX(ST) MMF/SMF 850nm/1310nm 550m/20km Media Converter - 100% compatible and guaranteed to work

The current standard USB connector is USB Type-A. Even as the world has moved from USB 1 to USB 2 and on to modern USB 3 devices, that connector has stayed the same. Since it only plugs in one way, it has always been necessary to make sure it is...

Vigilance full hd 2mp h.265 outdoor mini dome network camera

Bring fiber to the desktop more conveniently and at a lower cost than installing fiber NICs. Black Box® Multipower Miniature Media Converters make it easy to bring fiber to the desktop. Just connect a Miniature Media Converter to your PC's copper port...

ADD-FMC-FX-2SC is a Media Converter that converts a 100Base-TX(RJ45) to 100Base-LX(SC) via a 1310nm single-mode fiber (SMF) SC connector, which allows distance reach up to 20km. ADD-FMC-FX-2SC provides a cost effective conversion from 100Base Copper to...

Autonegotiates for speed and duplex. A DIP switch enables Link Fault Pass-Through to be turned on and off for better troubleshooting. Powered by a universal AC power supply, a PC's USB port, or the optional rackmountable PowerTray. Auto MDI/MDI-X means...

Easy to install. Connects T1 or E1 PBXs, CSUs, or routers over fiber to protect against noise and increase network reliability. Supports AMI, B8ZS, and HDB3 line codes. A crossover switch on the RJ-45/RJ-48 port enables easy equipment connections...

Expand your network capacity and fulfill requirement with this 2 transceiver/media converterSupports twisted pair cables for durability and improved signal transfer while ensuring smooth and seamless data transferCan be placed on Desktop surface for...

DIN rail usage. DIN rail is an industry-standard metal rail, usually installed inside an electrical enclosure, which serves as a mount for small electrical devices specially designed for use with DIN rails. These devices snap right onto the rails,...

Industrial RS-232?RS-422/RS-485 DIN Rail ConverterUL® approved.Three-way isolation, 2000-V input/output.Operates from -40 to +185°F (-40 to +85°C).Converts unbalanced half- or full duplex RS-232 signals to balanced full duplex RS-422 or 2-wire half- or...

The MED102A is our premium serial to single-mode fiber optic converter. It provides versatile connections between asychronous full- or half-duplex serial equipment using duplex single-mode fiber optic cable. The converter can also be set up in a...

Most industrial computer systems come with standard RS-232 serial ports. Though widely accepted, RS-232 has limited transmission speed, range, and networking capabilities. The RS-422 and RS-485 standards overcome these limitations by using differential...

The RS-232 to RS-422/485 serial converters are compact and tough. Each model is designed and tested to meet heavy industrial EMC standards. The RS-232 signal is connected through a female DB9 connector. The RS-422/485 (2-wire and 4-wire) signal is...

Autosenses speeds up to 115.2 kbps. Works as a standalone or hot-swappable chassis-based extender. Easy to install. Includes a power supply. Or you can power multiple units with the space-saving 19" rackmountable FlexPoint Power Chassis. Features...

To extend your serial connections over secure, interference-free fiber optic media, order BLACK BOX® FlexPoint RS-232 to Fiber Converters. Ideal for extending links to RS-232 equipment such as controllers, modems, and terminals in industrial networking...

Attach multiple devices together or expand the number of devices connected to your existing network by using 2 transceiver/media converterThe External provides convenient installation

The IMC-370 series offers the most compact media converters. They can extend the 10, 100 and 1000Mbps twisted-pair network segments up to 80km over fiber technology. Supporting both 10/100/1000Mbps auto negotiation on the copper port and 1000Mbps...

Further Details Functions as a Layer 2 switch-each port is capable of learning and aging up to 1024 MAC addresses. Sends data up to 2 kilometers (62.1 mi.). Complies with 10BASE-T, 100BASE-TX, and 100BASE-FX IEEE 802.3 standards. Both UTP and fiber...

Further Details Sends data up to 28 kilometers (17.3 mi.). Complies with 10BASE-T, 100BASE-TX, and 100BASE-FX IEEE 802.3 standards. Both UTP and fiber ports support full- and half-duplex operation. UTP port autosenses 10- or 100-Mbps speeds. Manual...

Autosensing 110-220-VAC power supply ensures reliability and continuous transmission. A range select feature compensates for coupled power variations. Switch-selectable DTE/DCE option. Set to perform like a DTE so it can communicate with another DCE...

Acts as power sourcing equipment (PSE) on the copper side to provide up to 30 watts of power. Smart, plug-and-play installation. Add devices to your network without any reconfiguration. The copper port supports full-duplex, auto-MDI/MDI-X, and...

Further DetailsThe High-Density Media Converter System II module featured here is ideal for establishing longer Fast Ethernet runs across your campus and beyond. A 1300-nm multimode module, it transmits 100-Mbps data over duplex fiber as far as 2...

Further Details This Layer 1 module for the High-Density Media Converter System II belongs to a large family of modular media converter and communications options for your managed enterprise network. With many modules to choose from, this system can...

Addon f5 networks f5-upg-sfp+-r compatible taa compliant 10gbase-sr sfp+ transcenull

ADD-GMC-SFP is a Media Converter that converts a 1000Base Copper to 1000Base-X via an Open SFP Port. The Open SFP Port allows users to customize between the SX, LX, or BX connections. The ADD-GMC-SFP provides a cost effective conversion from 1000Base...

The 10/100BASE-TX to Multimode 100BASE-FX Mini Converter from Cables To Go helps ensure smooth implementation or easy expansion of a Fast Ethernet network. The converter is completely transparent, so the network performs exactly as it did before. It now...

The 10/100BASE-TX to Multimode 100BASE-FX Mini Converter from Cables To Go helps ensure smooth implementation or easy expansion of a Fast Ethernet network. The converter is completely transparent, so the network performs exactly as it did before. It now...